close
R I A

AI in Manufacturing

AI Industry Specializations · Shop floor

Design, deploy and sustain AI on the line — with a real-time pipeline and a measured business case

RIA’s AI in Manufacturing programme prepares working manufacturing, automation, maintenance, quality and process professionals to build AI systems on the shop floor. Every week extends one real-time data thread: capture from PLCs, sensors and cameras, feature windows, model scoring, dashboards and alerts.

The planned shape is 12 weeks and about 96 hours (live sessions plus labs and project work), with an optional week-0 pre-work pack. That shape is subject to batch and faculty planning. The cohort and any certificate are confirmed when you enquire. Classroom batches run at Purasawalkam (City Center, 186 Purasawalkam High Road, Kilpauk, Chennai 600010) and Saligramam (Venkatesa Nagar, Virugambakkam, Chennai 600092). Call +91 98843 63200.

Related programmes: Industrial Automation & Industry 4.0, AI in Semiconductor Design, and AI in Drones for aerial inspection. This course does not authorise unsupervised control of a live production cell. A person owns safety limits, change control and go-live.

What you will learn

  • Smart manufacturing, OEE and use-case framing with an accountable owner
  • Industrial data capture with OPC UA, MQTT, timestamps and quality flags
  • Python and machine learning for time-series, with SPC as the baseline
  • Computer vision for defect inspection — lighting first, then the model
  • Real-time vision within a latency budget and cost-based thresholds
  • Predictive maintenance: health indices, alerts and CMMS-ready actions
  • Process optimisation and simple digital twins under validated limits
  • Robotics and AI perception: vision-guided pick with measured success rate
  • Edge AI deployment, rollback drills and OT-aware networking
  • MLOps: drift monitoring, model registry and management of change
  • GenAI copilots over plant documents with citations; safety and cybersecurity
  • Capstone defense with quantified OEE, scrap, downtime or energy results

Full program syllabus & curriculum

Domain literacy + applied AI labs + responsible review + capstone

  • AI in Manufacturing

    We teach shop-floor AI around one real-time thread: capture from PLCs, sensors and cameras, feature windows, model scoring, dashboards and alerts. A person owns safety limits, change control and go-live. Complements Industrial Automation & Industry 4.0.

    Domain Knowledge We Teach
    • Industry 4.0, ISA-95 and smart-factory concepts
    • PLC, sensor, MES and shop-floor signal chains
    • Quality, yield, scrap and OEE metrics
    • Maintenance strategies and downtime drivers
    • Production constraints, functional safety and OT cyber basics
    AI Skills You Will Learn
    • OPC UA / MQTT capture with timestamps and quality flags
    • Time-series ML and SPC baselines without leakage
    • Computer vision for defect detection with cost-based thresholds
    • Predictive maintenance health indices tied to CMMS actions
    • Edge deployment, drift monitoring and management of change
    Hands-on Outcomes
    • Build a working real-time capture and scoring pipeline
    • Run a live inspection demo inside a latency budget
    • Design a maintenance trigger with a cost-benefit note
    • Deploy and roll back an edge model with a runbook
    • Defend a capstone with quantified OEE, scrap, downtime or energy results

    Programme shape: 12 weeks, about 96 hours (live sessions plus labs and project work), optional week-0 pre-work. Subject to batch and faculty planning. The cohort and any certificate are confirmed on enquiry.

    Real-time thread: sources feed a broker; the stream is windowed into features; a model scores each window or frame; results drive a live dashboard and alerts. Latency budgets set in week 2 are checked in every lab.

    Week 1 — Smart manufacturing, OEE and use-case framing

    Where AI fits in the automation pyramid (ISA-95). Calculate OEE and the six big losses from event data. Score and select a use case with an accountable owner. Deliverable: one-page use-case brief with a baseline KPI.

    Week 2 — Industrial data capture

    PLC scan cycles, tags and sensor chains. Build an OPC UA to MQTT to time-series pipeline. Detect dropouts, clock drift and stuck values. Deliverable: working capture pipeline and a data-quality report.

    Week 3 — Python and machine learning for time-series

    Rolling-window features, FFT and statistical features. Anomaly detection compared with Shewhart limits. Time-based splits — never random. Soft sensors with lab-lag alignment. Deliverable: notebook plus a live anomaly-detection demo.

    Week 4 — Computer vision for inspection I

    Lighting, lens and camera before the network. Transfer-learning classifiers and detectors. Label audit and inspector agreement. Deliverable: model card with data, metrics, limits and intended use.

    Week 5 — Computer vision for inspection II (real time)

    Live-frame inference inside the latency budget. Thresholds from the cost of false rejects versus escapes. Reject logic with human review and golden-sample checks. Deliverable: live inspection demo and latency report.

    Week 6 — Predictive maintenance

    Link failure modes to measurable signals. Health index, alert design and CMMS integration. Cost comparison with fixed-interval maintenance. Deliverable: maintenance trigger design and cost-benefit analysis.

    Week 7 — Process optimisation and digital twins

    Designed experiments and response surfaces. A simple digital twin for what-if scenarios under validated process limits. Energy and scrap before/after on the same shift pattern. Deliverable: KPI before-and-after report.

    Week 8 — Robotics and AI perception

    Frames, transforms and kinematics. Hand-eye calibration and a vision-guided pick. Measure success rate and cycle time over repeated trials. Deliverable: pick success report with failure analysis.

    Week 9 — Edge AI deployment

    Edge versus cloud trade-offs. Quantisation, container deploy, latency/throughput tests and a rollback drill. Plan for network loss so the line stays safe when AI is down. Deliverable: deployment runbook and latency test results.

    Week 10 — MLOps, monitoring and change control

    Data drift versus concept drift. Retraining triggers, model registry and audit trail. Management of change and re-validation. Deliverable: monitoring plan and a sample change record.

    Week 11 — GenAI copilots, safety and cybersecurity

    Retrieval over SOPs and manuals with citations. Audit for accuracy and unsupported claims. Functional safety, zones and conduits, and a hazard assessment of the AI-enabled cell. Deliverable: audit report and a safety case.

    Week 12 — Capstone defense and business case

    Integrate pipeline, model, deployment and safety work. Present measured results and a business case in OEE, scrap, downtime or energy terms. Plan handover and operator adoption. Deliverable: capstone package and defense.

Common questions

  • Will this course write commands to a live PLC without review?

    No. Assistants and models may draft advice, dashboards and alerts. A person owns safety limits, change control and any write path to plant equipment. The GenAI lab cites the manual page or says it does not know — it never writes to a PLC.

  • Is this the same as Industrial Automation & Industry 4.0?

    No. Industrial Automation covers PLC, HMI, SCADA and cell integration in depth. AI in Manufacturing centres on the real-time AI pipeline: capture, models, vision, edge, MLOps and a measured business case. Many learners take both.

  • Do I need strong Python before I start?

    No. Weeks 2 and 3 teach Python and time-series ML from the ground up. Optional week-0 pre-work and a catch-up pack are available for learners who need them.

  • Where is the course taught in Chennai?

    At RIA Purasawalkam, City Center, 186 Purasawalkam High Road, Kilpauk 600010, and RIA Saligramam, 1st Cross Street, Venkatesa Nagar, Virugambakkam 600092. Call +91 98843 63200.

  • How long is the programme?

    The planned shape is 12 weeks and about 96 hours, plus optional week-0 pre-work. Batch length, timetable and any certificate are confirmed when you enquire.

Skills you build

  • A working OPC UA / MQTT capture pipeline with data-quality handling
  • Defect inspection and predictive-maintenance models with plant metrics
  • Edge deployment with latency tests and a rollback path
  • A safety and risk note plus a capstone business case in OEE terms

Who this is for

  • Manufacturing, automation, maintenance, quality and process engineers
  • Technicians and supervisors with two or more years of plant exposure
  • Industrial Automation learners who want the AI and vision layer
  • Data practitioners moving onto shop-floor problems with an accountable owner

Enquire about AI in Manufacturing

Ready to start AI in Manufacturing?

Enquire for batch dates at Purasawalkam or Saligramam. A person owns safety limits and go-live. Call +91 98843 63200.

Across every course

Seminars, workshops and faculty development

The same formats sit on any RIA subject. Name the course and the room — a faculty programme, a seminar, a workshop, an internship, or help with a project.

See how a session is arranged
Go To Top